Sunday, 15 June 2008

Change of mind

More thinking and I am now pretty sure i will go for a 200Di instead of 200Tdi, in other words remove the turbo from the 200Tdi. This means that there wont be as much power as would have been produced by the turbo but to be honest a series 3 is just not designed not travel at the speed a 200Tdi could propell it at and the temptation would be to strong to just put the foot down + its braking abilities are limited. There would also always be the worry of destroying my gearbox, diff and halfshafts.

I will be keeping the disco rad, intercooler, oilcooler and turbo so that if one day i feel the urge to fit them i can. This is an interesting link... http://www.glencoyne.co.uk/200di2.htm .

Tuesday, 10 June 2008

200tdi here we come!!

Well, I'v been discusing it with a few people now and i am probably going to fit a 200Tdi or 200Di(remove the turbo)... Im quite tempted to go for the first option!

I am hoping to buy an MOT failed Land Rover discovery that i will break. I will keep the Engine, engine electrics, inter-cooler, rad etc. and sell the rest.

The 2.5L 200tdi produces 111 BHP as opposed to my current 2.25nad wich produces 62 BHP.... thats quite a large difference and I cant wait!!

This isnt for sure yet but im 95% sure so it looks like it will happen.

Sprocket puller

Its not directly to do with the rebuild but i thought i would share it with you any way.I didnt want to by the tool as they looked pretty simple but cost a bit, so i decided to make one myself. It is a spocket puller for the timing chain sprockets. You bolt it onto the sprocket through the 2 slots and then tighten the centre bolt which is tapped into the puller, this then pulls the sprocket off... pretty simple really. Oh and it actually works!

A few pictures:




Td5 Bulkhead

I have now bought a bulkhead from a Td5 2001 defender, It is actually very similar to the series 3 bulkhead and only needs footwells replacing, transmition tunnel size increasing and the series 3 type windscrean hinges welding on, Which is quite amazing considering the Td5 bulkhead is just over 20 years new than my land rover.

Sorry about not updating in ages... im back now!

Sorry for not updating in a while but i'v had exams and have been pretty busy, I can get back to the land rover now though.

Sunday, 20 April 2008

just preping stuff to be fitted in the summer 20-04-08

I'm at a stage were im just getting stuff cleaned up to be fitted to the Land rover when i rebuild in the summer.

On todays list was clean up and repaint the heating radiator box thing.

I Attached the garden hose to it and it pushed out sum very strange coloured muck an rust, so I stupidly decided to attacched the air compressor to the radiator and consiquently covered my self in sludge but i dont think there will be much rubish left in there.
The casing had previously been painted silver a bit over enthusiastically and had paint drips all over it so looked a bit tatty.

I scraped most of the silver paint of and painted it in black. I also need to paint the heater fan at some stage.

Some pictures:













!!MY CHASSIS HAS ARRIVED!! 18-04-08

Due to issues with the trailor my dad and I were going to borrow we could not collect the chassis from 'Richards Chassis' our selves so we had them deliver it.

We unloaded my chassis, it is pretty easy for 3 people to carry but it becomes a bit of a mission when you have to turn it on its side to get through the gate.

Once done Alisdair came inside to discuss Land Rovers and the best way of fitting my new chassis along with lining up the body and all that stuff.

He had a quick sneak around my landy and gave some useful hints and was soon of to deliver the final chassis of the day to someone just 4 miles down the road from me.

There are photos to come but they're stuck on a phone at the moment...